BQE Pixel – ripping a tiny hole in the sky

Check out Jonathan Gutierrez ripping it up on his BQE Pixel. Loaded with DYS 1104 7500kv motors, PikoBLX, Cicada 10amp escs, TX01, 2530 quad blade props and 3s lipos... unstoppable and super agile. These little micros are the future!

read more

Runcam Swift Mini mounts for the BQE SX4/SX3

We love this new little Runcam Swift Mini, now available on preorder from Runcam.com. The Swift Mini is a perfect fit on the BQE SX3 and SX4, with our new 3d printed TPU mounts.  And if shaving a few grams off the camera wasn't enough, this mount and the new Mini...

read more

BMC3d updates the BQE 210 GoPro Session Mount

Check out the revised GoPro Session mount from BMC3d. Brent did a great job with this on the first round, and these new mounts are lighter and printed even cleaner. Now available in a wide range of colors and stripes over at BMC3d.co   [gallery link="file" columns="4"...

read more

BQE SX4 Customer Photos!

Check out these great photos from Cesar Fuentes in Yonkers... his Snow White SX4 is a cold hearted killer, running XNova 1806!     and a bonus, Cesar made this great video showing the SX4 with dual...

read more

BQE SX3 Build Guide

July 5th 2017 Edit: This build guide is a bit out of date. I wouldn't specifically recommend the electronics listed in this build. Since the release of this guide last fall, dozens of new escs and 20mm x 20mm flight controllers have been released, many of which would...

read more

Matek LED Give Away!

We're giving away 5 sets of Matek LED's to a random selection of our Pre-Order customers! Thanks to Matek Systems, we've got the perfect LED's for your BQE 210 build. These Matek Tail Lights with Buzzers fit like a glove, and we love the Motor Mount Circles on our...

read more

New GoPro Session mount for the BQE210

Well would you look at this beauty! Fresh off the printers at BMC3D, Brent Collier designed these awesome TPU mounts in 30º and 45º. Clean and simple. These should be available for purchase from Great3d.com soon! Keep an eye out for more...

read more

BQE210 – Customer photos!

We’ve shipped out the first few Pre-order frames, and have started getting photos back from our customers. So awesome! Here’s a gallery of shots from Cesar Fuentes in Yonkers NY and one from official BQE test pilot Ricky Roman, in Queens.

read more

NEW 3d Parts for Airblade ZMR150

Here’s something I’ve been working on with Patrick Bishop at PB3D… Custom TPU camera and antenna mounts for the Airblade ZMR 150. Click the photo for more information, links and a photo gallery.

read more

Coming Soon: BQE 127b

We've been hard at work revising the BQE 127b frame for brushed motors. With such a concentrated center of mass, it's a lot of fun to fly. Keep an eye out for updates!

read more

Grab a BQE T-Shirt!

TSHIRTS NOW AVAILABLE at Mellowvision Exclusives! Represent NYC! Don't worry, we've got you covered. Every size, tons of colors, super nice American Apparel T's.

read more